Solid-state relay module; Nominal input voltage: 24 VDC; Output voltage range: 0
30 VDC; Limiting continuous current: 8 A; Module width: 6 mm.
The WAGO 857 series plug-in input solid-state relay (SSR) features a pre-assembled socket base and a yellow LED indicator. It supports a 2-wire connection and is designed for single-pole, single-phase applications with a control voltage range of 16.8-30Vdc (24Vdc nominal). The relay has a rated output voltage of 1Vdc-30Vdc (24Vdc nominal) and can handle a continuous current of 8A. It includes Push-in CAGE CLAMP connections for easy installation and is mounted on a DIN-35 rail with a 6mm width. The device has an IP20 protection rating and is equivalent to model 857734.
- circuit type:
- 2-wire connection
- connection technology:
- Push-in CAGE CLAMP
- country of origin sales organisation germany:
- CN
- depth from upper edge of din rail:
- 81 mm / 3.189 inch
- dielectric strength control load circuit ac 1 min:
- 3.51 kVrms
- fine stranded conductor:
- 0.34 2.5 mm / 22 14 AWG
- fire load:
- 0.000 MJ
- height:
- 94 mm / 3.701 inch
- input voltage range high level:
- DC 16.8 30 V
- input voltage range low level:
- DC 0 4 V
- insulation type between adjacent devices of the the same type:
- Double insulation (safe isolation)
- insulation type control load circuit:
- None
- insulation type to any type of adjacent devices:
- Basic insulation
- leakage current at rated voltage:
- ¤ 1 A
- limiting continuous current:
- 8 A: 6 A (UL)
- mounting type:
- DIN-35 rail
- nominal input current at un:
- 12 mA
- nominal input voltage un:
- DC 24 V (SELV)
- nominal output voltage:
- DC 24 V (SELV)
- note:
- Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks.
- operating altitude max:
- 2000 m
- output voltage range:
- DC 1 30 V
- overvoltage category:
- II
- packaging type:
- Box
- pollution degree:
- 2
- power loss max pl max:
- 0.3 W
- processing temperature:
- -25 +50 C
- protection type:
- IP20
- rated voltage:
- 300 V
- relative humidity:
- 5 95 % (no condensation permissible)
- safety information 1:
- Adjacent devices are devices of the same design (series) that are arranged next to each other with the same orientation on the mounting rail. An end stop (249-116) must be fitted to devices of other types for compliance with the reinforced insulation
- solid conductor:
- 0.34 2.5 mm / 22 14 AWG
- standards specifications:
- EN 61010-2-201 || EN 61373 || EN 61000-6-2 || EN 61000-6-3 || EN 50121-3-2 || EN 50121-4
- status indicator:
- Yellow LED
- strip length:
- 9 10 mm / 0.35 0.39 inch
- surrounding air operating temperature for ul:
- -25 60 C
- surrounding air temperature operation at un:
- -25 70 C
- surrounding air temperature storage:
- -40 70 C
- switching current min:
- 10 mA
- switching frequency:
- ¤ 500 Hz
- turn off time:
- ¤ 250 s
- turn on time:
- ¤ 60 s
- voltage drop at output max:
- ¤ DC 0.8 V
- wago basic relay:
- 857-181
- weight:
- 29.066 g
- width:
- 6 mm / 0.236 inch
