Socket without relay; 24 V AC/DC.
The WAGO 857 series relay base/socket module features a lever and LED, designed for 1C/O (single changeover) applications with a control voltage of 24Vac/24Vdc. It supports a continuous rated current of 6A and utilizes Push-in CAGE CLAMP spring connections for secure wiring. The module is designed for DIN-35 rail mounting with a width of 6mm and has an IP20 protection rating. It is equivalent to the model 857104.
- circuit type:
- Mains circuits
- connection technology:
- Push-in CAGE CLAMP
- country of origin sales organisation germany:
- CN
- depth from upper edge of din rail:
- 81 mm / 3.189 inch
- dielectric strength control load circuit ac 1 min:
- 3.51 kVrms
- dielectric strength open contact ac 1 min:
- 1 kVrms
- fine stranded conductor:
- 0.34 2.5 mm / 22 14 AWG
- fire load:
- 0.000 MJ
- height:
- 94 mm / 3.701 inch
- insulation type between adjacent devices of the the same type:
- Reinforced insulation (safe isolation)
- insulation type control load circuit:
- Reinforced insulation (safe isolation)
- limiting continuous current:
- 0.25
- mounting type:
- DIN-35 rail
- nominal input voltage un:
- AC/DC 24 V
- note:
- The technical data might be influenced by the used relay/SSR.
- operating altitude max:
- 2000 m
- overvoltage category:
- III
- packaging type:
- Box
- pollution degree:
- 2
- protection type:
- IP20
- rated surge voltage:
- 4 kV
- rated voltage:
- 300 V
- relative humidity:
- 5 95 % (no condensation permissible)
- solid conductor:
- 0.34 2.5 mm / 22 14 AWG
- standards specifications:
- EN 61010-2-201 || UR
- status indicator:
- Yellow LED
- strip length:
- 9 10 mm / 0.35 0.39 inch
- surrounding air temperature operation at un:
- -40 70 C
- surrounding air temperature storage:
- -40 70 C
- switching voltage max:
- AC 250 V
- weight:
- 26.320 g
- width:
- 6 mm / 0.236 inch
