Socket with solid state relay; Input DC 24 V; Output AC 24 V ... 240 V / 1A
- separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
- Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks.
The WAGO 788 series solid-state relay (SSR) features a plug-in input with a pre-assembled socket base and a red LED indicator. It supports a 2-wire connection and zero-cross switching, designed for single-pole, single-phase applications. The control voltage ranges from 18-30Vdc (24Vdc nominal), while the output rated voltage spans from 24Vac to 240Vac (230Vac nominal) with a continuous rated current of 1A. It includes Push-in CAGE CLAMP connections and is suitable for DIN-35 rail mounting with a 15mm width. The device has an IP20 protection rating and is equivalent to model 788720.
- circuit type:
- 2-wire connection || Zero-voltage switching
- color:
- Gray
- connection technology:
- Push-in CAGE CLAMP
- country of origin sales organisation germany:
- DE
- depth:
- 86 mm / 3.386 inch
- dielectric strength control load circuit ac 1 min:
- 3.75 kVrms
- fine stranded conductor:
- 0.34 2.5 mm / 22 14 AWG
- fire load:
- 0.682 MJ
- height from upper edge of din rail:
- 54 mm / 2.126 inch
- input voltage range high level:
- DC 18 30 V
- input voltage range low level:
- DC 0 4 V
- limiting continuous current:
- 0.0416666666666667
- mounting type:
- DIN-35 rail
- nominal input current at un:
- 7 mA
- nominal input voltage un:
- DC 24 V
- nominal output voltage:
- AC 230 V
- note:
- A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
- output voltage range:
- AC 24 240 V
- packaging type:
- Box
- pollution degree:
- 2
- processing temperature:
- -25 +50 C
- protection type:
- IP20
- solid conductor:
- 0.34 2.5 mm / 22 14 AWG
- standards specifications:
- EN 61000-6-2 || EN 61000-6-3 || EN 61373 || EN 61010-2-201 || UL 508 (max. 40 C/2.5 A)
- status indicator:
- Red LED
- strip length:
- 9 10 mm / 0.35 0.39 inch
- surrounding air operating temperature for ul:
- -40 60 C
- surrounding air temperature operation at un:
- -20 60 C
- surrounding air temperature storage:
- -40 70 C
- switching frequency:
- 50 Hz / 60 Hz
- turn off time:
- ¤ 10 ms
- turn on time:
- ¤ 10 ms
- voltage drop at output max:
- ¤ AC 1.1 V
- weight:
- 41.252 g
- width:
- 15 mm / 0.591 inch
