- Switched-mode power supply
- Natural convection cooling when horizontally mounted
- Enclosed for use in control cabinets
- Suitable for both parallel and series operation
- Electrically isolated output voltage (SELV) per UL 60950-1; PELV per EN 60204
The WAGO EPSITRON Eco series switch-mode AC/DC power supply unit (SMPS PSU) provides a 24Vdc (SELV) output at 2.5A and 60W. It supports an input voltage range of 90-264Vac or 90-373Vdc, suitable for single-phase AC or DC. The unit features CAGE CLAMP spring connections, is designed for DIN-35 rail mounting with a 50mm width, and has an IP20 protection rating. It operates in ambient temperatures from -10°C to +70°C and is equivalent to model 787712.
- conformity marking:
- CE
- connection technology:
- CAGE CLAMP
- connection type 1:
- Input/output
- control deviation:
- ¤ 1 %
- country of origin sales organisation germany:
- CN
- default setting:
- DC 24 V
- depth from upper edge of din rail:
- 136 mm / 5.354 inch
- derating:
- -3.3 %/K (> 50 C: 230 VAC)
- discharge current:
- ¤ 1 mA
- efficiency typ:
- 86 % (230 VAC)
- fine stranded conductor:
- 0.08 4 mm / 28 12 AWG
- fire load:
- 4.400 MJ
- height:
- 92 mm / 3.622 inch
- input current ii:
- ¤ 0.7 A (230 VAC): ¤ 1.2 A (115 VAC)
- input voltage range:
- AC 85 264 V: DC 90 373 V
- inrush current:
- ¤ 30 A
- internal fuse:
- F 2.5 A / 250 VAC
- isolation voltage pri gnd:
- DC 2.2 kV
- isolation voltage pri sec:
- DC 4.242 kV
- isolation voltage sec gnd:
- DC 0.7 kV
- mains failure hold up time:
- 20 ms (230 VAC)
- mounting type:
- DIN-35 rail
- mtbf:
- 480,000 h (per IEC 61709)
- nominal input voltage ui nom:
- 1 x AC 110 240 V
- nominal mains frequency range:
- 47 63 Hz: 0 Hz
- nominal output current io nom:
- 2.5 A (24 VDC)
- nominal output power:
- 60 W
- nominal output voltage uo nom:
- DC 24 V (SELV)
- note conductor cross section:
- 12 AWG: THHN, THWN
- open circuit proof:
- Yes
- operation status indicator:
- Green LED (24 VDC OK) || Red LED (overload)
- output voltage range:
- DC 22 28 V (adjustable)
- overload behavior:
- Constant power (in overload range: 1.15 1.4 x Io nom): Shutdown and automatic restart in the event of a short circuit
- overvoltage category:
- II
- packaging type:
- Box
- parallel operation:
- Yes
- phases:
- 1
- pollution degree:
- 2
- power factor:
- 0.5 (230 VAC)
- power factor correction pfc:
- Passive
- power loss max pl max:
- 11.5 W (110 VAC / 24 VDC: 2.75 A)
- power loss pl:
- ¤ 8.3 W (230 VAC: Nominal load)
- protection class:
- I
- protection type:
- IP20 (per EN 60529)
- recommended backup fusing:
- Circuit breaker: 10 A, 16 A: Tripping characteristic: B or C
- relative humidity:
- ¤ 95% (no condensation permissible)
- required backup fusing:
- An external DC fuse is required for the DC input voltage.
- residual ripple:
- ¤ 100 mV (Peak-to-peak)
- resistance to reverse feed:
- ¤ DC 28 V
- series operation:
- Yes
- short circuit protected:
- Yes
- signaling:
- 1 x LED DC OK (green) || 1 x Overload LED (red)
- solid conductor:
- 0.08 4 mm / 28 12 AWG
- standards specifications:
- EN 62368-1 || EN 61204-3 || CURus 60950-1 || CULus 508 || ANSI/ISA 12.12.01 (Class I Div. 2) || ATEX || IEC Ex
- strip length:
- 8 9 mm / 0.31 0.35 inch
- surrounding air temperature operation:
- -10 70 C
- surrounding air temperature storage:
- -25 85 C
- transient suppression primary:
- Varistor
- wago connector:
- WAGO 745 Series
- weight:
- 470.000 g
- width:
- 50 mm / 1.969 inch
