SMPSCompact 1-ph, 9999
- Switched-mode power supply
- Stepped profile, ideal for distribution boards/boxes
- Pluggable <i>picoMAX</i><sup></sup> connection technology (tool-free)
- Series operation
- Electrically isolated output voltage (SELV) per EN 62368/UL 62368 and EN 60335-1; PELV per EN 60204
The WAGO Compact switch-mode AC/DC power supply unit (SMPS PSU) provides a 24Vdc (SELV) output at 0.5A and 12W, with an input voltage range of 90-264Vac suitable for various single-phase AC inputs (110Vac, 120Vac, 220Vac, 230Vac, 240Vac). It features Push-in CAGE CLAMP spring connections and can be mounted on a DIN-35 rail or wall (using screws) with an 18mm width. The unit is rated IP20 and operates in ambient temperatures from -25°C to +70°C, equivalent to model 7871200.
- conformity marking:
- CE
- connection technology:
- Push-in CAGE CLAMP
- connection technology 2:
- Push-in CAGE CLAMP
- connection type 1:
- Input
- connection type 2:
- Output
- control deviation:
- ¤ 1 %
- country of origin sales organisation germany:
- CN
- depth:
- 55 mm / 2.165 inch
- depth from upper edge of din rail:
- 52.5 mm / 2.067 inch
- derating:
- -2.6 %/K (> 55 C)
- deviation dynamic load change 10 90:
- ¤ 1 %
- discharge current:
- ¤ 0.25 mA
- efficiency typ:
- 83 % (230 VAC: Nominal load): 82 % (110 VAC: Nominal load)
- fine stranded conductor:
- 0.2 2.5 mm / 24 12 AWG
- fine stranded conductor 2:
- 0.2 1.5 mm / 24 14 AWG
- fire load:
- 0.072 MJ
- flammability class per ul94:
- V2
- height:
- 90 mm / 3.543 inch
- input current ii:
- ¤ 0.27 A (100 VAC: 0.5 ADC)
- input voltage derating:
- -2 %/V (< 100 VAC)
- input voltage range:
- AC 90 264 V
- inrush current:
- ¤ 30 A (NTC)
- internal fuse:
- T 1 A / 250 VAC
- isolation voltage pri sec:
- DC 4.242 kV
- mains failure hold up time:
- 100 ms (230 VAC)
- mounting type:
- DIN-35 rail || Screw mount (back/side)
- mtbf:
- > 700,000 h (per IEC 61709)
- nominal input voltage ui nom:
- 1 x AC 100 240 V
- nominal mains frequency range:
- 47 63 Hz
- nominal output current io nom:
- 0.5 A
- nominal output power:
- 12 W
- nominal output voltage uo nom:
- DC 24 V (SELV)
- open circuit proof:
- Yes
- operation status indicator:
- Green LED (Uo)
- overload behavior:
- Shutdown and automatic restart in the event of a short circuit
- overvoltage category:
- II
- overvoltage protection secondary:
- ¤ 31 VDC (in the event of a fault)
- packaging type:
- Box
- parallel operation:
- No
- phases:
- 1
- pollution degree:
- 2
- power factor:
- 0.5
- power factor correction pfc:
- None
- power loss max pl max:
- 2.5 W (100 VAC / 24 VDC: 0.5 A)
- power loss pl:
- ¤ 0.2 W (230 VAC: No load)
- protection class:
- II
- protection type:
- IP20 (per EN 60529)
- recommended backup fusing:
- Circuit breaker: 6 A (C characteristic), 10 A (B characteristic) or higher
- relative humidity:
- 20 90 % (no condensation permissible)
- required backup fusing:
- An external DC fuse is required for the DC input voltage.
- residual ripple:
- ¤ 100 mV (Peak-to-peak)
- resistance to reverse feed:
- ¤ DC 31 V
- reverse voltage protection:
- Yes
- series operation:
- Yes, for 2 devices of the same type
- short circuit protected:
- Yes
- signaling:
- 1 x Status indication LED (green)
- solid conductor:
- 0.2 2.5 mm / 24 12 AWG
- solid conductor 2:
- 0.2 1.5 mm / 24 14 AWG
- standards specifications:
- EN 61204-3 || EN 60335-1 || EN 62368 || UL 62368 || UL 508
- strip length:
- 9 10 mm / 0.35 0.39 inch
- strip length 2:
- 8 9 mm / 0.31 0.35 inch
- surrounding air temperature operation:
- -25 70 C
- surrounding air temperature storage:
- -40 85 C
- transient suppression primary:
- Yes
- wago connector:
- picoMAX 5.0, WAGO 2092 Series
- wago connector 2:
- picoMAX 3.5 (WAGO 2091 Series)
- weight:
- 63.000 g
- width:
- 18 mm / 0.7 inch
