Component module with diode
Electrical Data
- Operating voltage: nbsp;AC/DC 250 V
- Peak reverse voltage: 1000 V
- Rectified current for each diode: 1 A
- Forward voltage for each Diode: 1.1 V
- Forward current (resistent) for each diode: 1 A
- Leakage current: 50 A
Safety and protection:
- Rated voltage: 250 V
- Rated impulse voltage: 4 kV
- Pollution degree: 2
- Protection class: IP00*
- Note on protection class: <b>Notice!</b>Live conductors! Protection against direct contact must be provided by the equipment builder, e.g., using a WAGO 709 Series cover (see Accessories) or a similar cover. The installation requirements for the particular application must be observed.
Connection Data
- Connection technology: CAGE CLAMP<sup></sup>
- WAGO terminal: WAGO 236 Series
- Solid conductor: 0.08 2.5 mm / 28 12 AWG
- Fine-stranded conductor: 0.08 2.5 mm / 28 12 AWG
- Strip length: 5 6 mm / 0.2 0.24 inch
- Note (conductor cross-section): 12 AWG: THHN, THWN
Geometrical Data
- Width: 47 mm / 1.85 inch
- Height from upper-edge of DIN-35 rail: 31.5 mm / 1.24 inch
- Depth: 65.5 mm / 2.579 inch
Mechanical Data
- Type of mounting: Mounting on carrier rail via carrier rail adapter
- Housing design: PCB
Material Data
- Fire load: 0.000 MJ
- Weight: 25.300 g
Environmental Requirements
- Surrounding air (operating) temperature: -25 40 C
Commercial data
- Packaging type: BOX
- Country of origin: DE
- GTIN: 4045454193027
- Customs Tariff No.: 85369010000
The component module features 14 diodes (1N4007) with a common anode on a stand-alone PCB, utilizing WAGO's 289 series with CAGE CLAMP spring connections. It supports control voltages of 250Vac/250Vdc and is designed for DIN-rail mounting via a rail adapter, with a width of 42.5mm. The module operates within an ambient temperature range of -25°C to +40°C and is equivalent to model 289121.
- connection technology:
- CAGE CLAMP
- country of origin sales organisation germany:
- DE
- depth:
- 31.5 mm / 1.24 inch
- fine stranded conductor:
- 0.08 2.5 mm / 28 12 AWG
- fire load:
- 0.000 MJ
- forward current per diode resistive:
- 0.0416666666666667
- forward voltage per diode:
- 1.1 V
- height from upper edge of din rail:
- 65.5 mm / 2.58 inch
- housing design:
- PCB
- leakage current:
- 50 A
- mounting type:
- Mounting on DIN-rail via DIN-rail adapter
- note:
- Max. admissible current per the manufacters data sheet. With all diodes loaded, the continuous current must be reduced to 0.45 A.
- note conductor cross section:
- 12 AWG: THHN, THWN
- note on protection type:
- Notice! Live parts can be easily touched! Protection against direct contact must be provided by the equipment manufacturer, e.g., using a WAGO 709 Series Cover (see Accessories) or a similar cover. The installation guidelines must be observ
- operating altitude max:
- 2000 m
- operating voltage:
- ¤ AC/DC 250 V
- packaging type:
- Box
- peak reverse voltage:
- 1000 V
- pollution degree:
- 2
- protection type:
- IP00*
- relative humidity:
- ¤ 85% (non-condensing)
- solid conductor:
- 0.08 2.5 mm / 28 12 AWG
- standards specifications:
- EN 61010-2-201
- strip length:
- 5 6 mm / 0.2 0.24 inch
- surrounding air temperature operation:
- -25 40 C
- surrounding air temperature storage:
- -40 70 C
- wago connector:
- WAGO 236 Series
- weight:
- 25.300 g
- width:
- 47 mm / 1.85 inch
