Component module with diode; with 9 pcs; Diode 1N5408; 2,50 mm².
The component module features nine 1N5408 diodes housed in a mounting carrier from WAGO's 289 series, designed for control voltages of 250Vac/250Vdc. It includes CAGE CLAMP spring connections and is suitable for DIN-35 rail mounting with a width of 51mm. The module operates within an ambient temperature range of -25°C to +40°C and is equivalent to model 289105.
- connection technology:
- CAGE CLAMP
- country of origin sales organisation germany:
- DE
- depth:
- 52 mm / 2.047 inch
- depth from upper edge of din rail:
- 48 mm / 1.89 inch
- fine stranded conductor:
- 0.08 2.5 mm / 28 12 AWG
- fire load:
- 0.534 MJ
- forward current per diode resistive:
- 0.125
- forward voltage per diode:
- 1.3 V
- height:
- 85 mm / 3.346 inch
- height from upper edge of din rail:
- 82.5 mm / 3.25 inch
- housing design:
- Mounting carrier
- leakage current:
- 10 A
- mounting type:
- DIN-35 rail
- note:
- Max. admissible current per the manufacters data sheet. With all diodes loaded, the continuous current must be reduced.
- note conductor cross section:
- 12 AWG: THHN, THWN
- note on protection type:
- Notice! Live parts can be easily touched! Protection against direct contact must be provided by the equipment manufacturer, e.g., using a WAGO 709 Series Cover (see Accessories) or a similar cover. The installation guidelines must be observ
- operating voltage:
- ¤ AC/DC 250 V
- packaging type:
- Box
- peak reverse voltage:
- 1000 V
- pollution degree:
- 2
- protection type:
- IP00*
- rated surge voltage:
- 4 kV
- rated voltage:
- 250 V
- rectified current for each diode resistive:
- 0.125
- solid conductor:
- 0.08 2.5 mm / 28 12 AWG
- strip length:
- 5 6 mm / 0.2 0.24 inch
- surrounding air temperature operation:
- -25 40 C
- wago connector:
- WAGO 736 Series
- weight:
- 80.640 g
- width:
- 51 mm / 2.008 inch
