- Analog unipolar/bipolar signals at input/output
- A digital signal output reacts to configured measuring range limits (switching ON/OFF delay and threshold value switch function configurable with up to two threshold values).
- A digital HOLD input freezes the output signal.
- Clipping capability provides analog signal limitation to output end values.
- Adjustable software/hardware filter
- Input/Output response simulation via configuration display
The WAGO 2857 JUMPFLEX series single-channel isolation amplifier features a versatile analog input range and output options, configurable via DIP switch, software, app, or display. It supports various current and voltage inputs and outputs, operates on a supply voltage of 16.8-26.4Vdc (24Vdc nominal), and includes Push-in CAGE CLAMP spring connections for easy installation on a DIN-35 rail. The device is compact (12.5mm width), rated IP20, and can function in ambient temperatures from -40°C to +70°C, equivalent to model 2857401.
- configurable rise fall delay time do:
- 0 60 s (via software)
- configuration options:
- DIP switch || WAGO Interface Configuration Software || WAGO Interface Configuration App || WAGO Configuration Display
- conformity marking:
- CE
- connection technology:
- Push-in CAGE CLAMP
- continuous current do max:
- 100 mA (no internal restriction)
- country of origin sales organisation germany:
- DE
- depth from upper edge of din rail:
- 107 mm / 4.213 inch
- emc emission of interference:
- EN 61000-6-4: EN 61326-2-3: EN 50121-3-2
- emc immunity to interference:
- EN 61000-6-2: EN 61326-2-3: EN 50121-3-2
- fine stranded conductor:
- 0.2 2.5 mm / 24 12 AWG
- fire load:
- 1.391 MJ
- height:
- 110 mm / 4.331 inch
- hold signal:
- 11.8 V US
- input current max:
- 120 mA
- input resistance current input:
- ¤ 50
- input resistance voltage input:
- 1 M
- input signal current:
- 1 mA: 0 1 mA: 10 mA: 0 10 mA: 2 10 mA: 20 mA: 0 20 mA: 4 20 mA: 100 mA: 0 100 mA
- input signal type:
- Voltage || Current
- input signal voltage:
- 1 V: 0 1 V: 5 V: 0 5 V: 1 5 V: 10 V: 0 10 V: 2 10 V: 30 V: 0 30 V: 100 V: 0 100 V: 200 V: 0 220 V
- input voltage max:
- 250 V
- limit frequency:
- 10 kHz / 5 kHz / 100 Hz / 30 Hz (configurable via DIP switch or software)
- load impedance current output:
- ¤ 600
- load impedance voltage output:
- 1 k
- mounting type:
- DIN-35 rail
- nominal supply voltage us:
- DC 24 V
- note:
- This product is supplied with 24 VDC, which can be commoned using lateral push-in type jumper bars: (6.1) US+ (BR) and (6.2) GND 2 (BR). With this variant, it is necessary to ensure that the maximum permissible total current of 1 A is not exceeded.Ad
- number of switching thresholds do:
- 1 or 2 (adjustable)
- output signal current:
- 10 mA: 0 10 mA: 2 10 mA: 20 mA: 0 20 mA: 4 20 mA
- output signal type:
- Voltage || Current
- output signal voltage:
- 5 V: 0 5 V: 1 5 V: 10 V: 0 10 V: 2 10 V
- packaging type:
- Bag
- power consumption at nominal supply voltage:
- ¤ 70 mA (+ IDO)
- power supply type:
- 24 VDC
- setting range frequency generator:
- 0.3 100 Hz
- software filter adjustable:
- Moving average value (filter level: 30)
- solid conductor:
- 0.2 2.5 mm / 24 12 AWG
- standards specifications:
- EN 60664-1 || EN 61373
- step response typ:
- 1 ms
- strip length:
- 9 10 mm / 0.35 0.39 inch
- supply voltage range:
- 30 %
- surrounding air temperature operation:
- -40 70 C
- surrounding air temperature storage:
- -40 85 C
- switching voltage do max:
- Supply voltage (applied): 0.3 V
- temperature coefficient:
- ¤ 0.01 %/K
- test voltage input output supply:
- AC 4 kV: 50 Hz: 1 min
- transmission error typ:
- ¤ 0.1 % of upper-range value
- wago connector:
- picoMAX 5.0
- weight:
- 85.859 g
- width:
- 12.5 mm / 0.492 inch
