2-conductor through terminal block 35 mm, red
Electrical Data
- Rated voltage (III / 3): 1000 V
- Rated impulse voltage (III / 3): 8 kV
- Rated current: 125 A
- Legend (ratings): (III / 3) Overvoltage category III / Pollution degree 3
Connection Data
- Connection technology: POWER CAGE CLAMP
- Actuation type: Operating tool
- Connectable conductor materials: Copper
- Solid conductor: 6 35 mm / 10 2 AWG
- Fine-stranded conductor: 6 35 mm / 10 2 AWG
- Strip length: 25 mm / 0.98 inch
- Total number of connection points: 2
- Total number of potentials: 1
- Number of levels: 1
- Type of wiring: Side-entry wiring
Geometrical Data
- Width: 16 mm / 0.63 inch
- Height from upper-edge of DIN-35 rail: 63 mm / 2.48 inch
- Depth: 86 mm / 3.386 inch
Mechanical Data
- Design: horizontal
- Type of mounting: DIN-35 rail
- Marking level: Side marking
Material Data
- Color: red
- Insulating material: Polyamide 66 (PA 66)
- Fire load: 0.000 MJ
- Weight: 81.632 g
Commercial data
- Packaging type: BOX
- Country of origin: PL
- GTIN: 4055143762755
- Customs Tariff No.: 85369010000
The WAGO 285 series feed-through terminal block is a red, single-deck unit with side marking slots, designed for one feed-through pole and two wires using one clamp each. It supports a nominal cross-section of 35mm² and accommodates wire sizes from 6mm² to 35mm² or #8AWG to #2AWG. The terminal block is rated for a current of 125A and features POWER CAGE-CLAMP screw connections. It mounts on a DIN-35 rail with dimensions of 35 x 15mm and has a width of 16mm, equivalent to model 285133.
- actuation type:
- Operating tool
- approvals per:
- UL 1059
- color:
- Red
- connectable conductor materials:
- Copper
- connection technology:
- POWER CAGE CLAMP
- country of origin sales organisation germany:
- PL
- depth from upper edge of din rail:
- 63 mm / 2.48 inch
- design:
- Horizontal type
- fine stranded conductor:
- 6 35 mm / 8 2 AWG
- fine stranded conductor with insulated ferrule:
- 6 35 mm / 8 2 AWG
- fine stranded conductor with uninsulated ferrule:
- 6 35 mm / 8 2 AWG
- fire load:
- 0.078 MJ
- flammability class per ul94:
- V0
- height:
- 86 mm / 3.386 inch
- insulation material:
- Polyamide (PA66)
- legend ratings:
- (III / 3) Overvoltage category III / Pollution degree 3
- marking level:
- Side marking
- mounting type:
- DIN-35 rail
- nominal voltage iii 3:
- 1000 V
- packaging type:
- Box
- rated current:
- 125 A
- rated current csa use group b:
- 115 A
- rated current csa use group d:
- 115 A
- rated current ul use group b:
- 115 A
- rated current ul use group c:
- 115 A
- rated surge voltage iii 3:
- 8 kV
- rated voltage csa use group b:
- 600 V
- rated voltage csa use group c:
- 600 V
- rated voltage ul use group b:
- 600 V
- rated voltage ul use group c:
- 600 V
- ratings per:
- IEC/EN 60947-7-1
- safety information 1:
- Only suitable for DIN 35 x 15 rail
- solid conductor:
- 6 35 mm / 8 2 AWG
- stranded conductor:
- 6 35 mm / 8 2 AWG
- strip length:
- 25 mm / 0.98 inch
- weight:
- 81.491 g
- width:
- 16 mm / 0.63 inch
- wiring direction:
- Side-entry wiring
