3-conductor disconnect/test terminal block; e.g., voltage transformer circuits; with touch-proof test sockets; for 4 mm à test plugs; for DIN-rail 35 x 15 and 35 x 7.5; 6 mm²; CAGE CLAMP; 6,00 mm²; gray.
The WAGO 282 series is a gray feed-through disconnect/test terminal block featuring a single deck with a lever disconnect and a center marking slot. It includes a touchproof test point and accommodates one disconnect feed-through pole with three wires (one clamp and two clamps). It supports wire sizes from 0.2mm² to 6mm² or #24AWG to #10AWG, with a rated current of 30A. The terminal block uses CAGE CLAMP spring connections and is designed for mounting on a DIN-35 rail (35 x 15 / 35 x 7.5) with an 8mm width, equivalent to model 282860.
- actuation type:
- Operating tool
- color:
- Gray
- connectable conductor materials:
- Copper
- connection technology:
- CAGE CLAMP
- country of origin sales organisation germany:
- CN
- depth from upper edge of din rail:
- 75 mm / 2.953 inch
- design:
- Angled
- fine stranded conductor:
- 0.2 6 mm / 24 10 AWG
- fire load:
- 0.688 MJ
- flammability class per ul94:
- V0
- height:
- 122 mm / 4.803 inch
- insulation material:
- Polyamide (PA66)
- legend ratings:
- (III / 3) Overvoltage category III / Pollution degree 3
- marking level:
- Center marking
- mounting type:
- DIN-35 rail
- nominal voltage iii 3:
- 500 V
- packaging type:
- Box
- rated current:
- 30 A
- rated surge voltage iii 3:
- 6 kV
- solid conductor:
- 0.2 6 mm / 24 10 AWG
- strip length:
- 12 13 mm / 0.47 0.51 inch
- weight:
- 43.191 g
- width:
- 8 mm / 0.315 inch
- wiring direction:
- Front-entry wiring
