WAGO 2202-6407 4-conductor ground terminal block; with push-button; 2.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm²; green-yellow
Wago
$8.00
(No reviews yet)
Write a Review
Write a Review
Wago
WAGO 2202-6407 4-conductor ground terminal block; with push-button; 2.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm²; green-yellow
4-conductor ground terminal block; with push-button; 2.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm²; green-yellow.
The WAGO 2202 TOPJOB S series ground/earthing terminal block is designed for Ex e II applications and features a 1-deck/level with button, side/lateral, and center marking slots. It is green-yellow in color and supports 1 grounding/protective-earth (1PE) connection for 4 wires (2 push-in + 2 push-in) with a nominal cross-section of 2.5mm², suitable for wire sizes ranging from 0.25mm² to 4mm² or #22AWG to #12AWG. The terminal block utilizes Push-in CAGE CLAMP spring connections and mounts on a DIN-35 rail (35 x 15 / 35 x 7.5) with a width of 5.2mm, equivalent to model 22026407.
- actuation type:
- Push-in || Push-button || Operating tool
- color:
- Green-yellow
- connectable conductor materials:
- Copper
- connection technology:
- Push-in CAGE CLAMP
- country of origin sales organisation germany:
- DE
- depth from upper edge of din rail:
- 38.9 mm / 1.531 inch
- design:
- Angled
- fine stranded conductor:
- 0.25 4 mm / 22 12 AWG
- fine stranded conductor with ferrule push in termination:
- 1 2.5 mm / 18 14 AWG
- fine stranded conductor with insulated ferrule:
- 1 2.5 mm / 18 14 AWG
- fire load:
- 0.000 MJ
- flammability class per ul94:
- V0
- height:
- 52.6 mm / 2.071 inch
- insulation material:
- Polyamide (PA66)
- marking level:
- Center/side marking
- mounting type:
- DIN-35 rail
- nominal cross section:
- 2.5 mm
- note conductor cross section:
- Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
- packaging type:
- Box
- ratings per:
- IEC/EN 60947-7-2
- safety information 1:
- Notice: This terminal block cannot be commoned with push-in type jumper bars.
- safety information 2:
- An end plate must be applied when changing from a 3-conductor terminal block to a 4-conductor terminal block and vice versa.
- solid conductor:
- 0.25 4 mm / 22 12 AWG
- solid conductor push in termination:
- 0.75 4 mm / 18 12 AWG
- strip length:
- 10 12 mm / 0.39 0.47 inch
- weight:
- 9.147 g
- width:
- 5.2 mm / 0.205 inch
- wiring direction:
- Front-entry wiring, angled
