null
Schneider Electric LXM28AU15M3X Lexium28 Can Io Drive 1/3Ph 230V 1,5Kw

Schneider Electric LXM28AU15M3X Lexium28 Can Io Drive 1/3Ph 230V 1,5Kw

Schneider Electric
SKU:
LXM28AU15M3X
|
UPC:
3606480711817
$1,031.29
(No reviews yet) Write a Review
Condition:
New
Current Stock:
Description
This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated CANopen, CAN motion interface 7-segment display with 5 buttons. It is a motion servo drive with a rated supply voltage of 220V (single and three phase), an output current of 7A, nominal power of 1.5kW and continuous power of 1500W. It is furnished with spring terminal for electrical connection and RJ45 connectors (CN4) for CANopen/CAN motion. There is an electrical isolation between power/control. It offers CANopen and CAN motion communication interfaces and physical interface of RS485 for Modbus Serial line slave. It is an IP20 rated product. Its dimensions are 55mm (width) x 170mm (depth) x 150mm (height). It weighs 1.2kg. It is suitable for machine control solutions. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with servo motor BCH2 (130mm, 3 motor stacks) at 1500W. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.
Additional Information
Supply Frequency:
50/60 Hz - 5...5 %
Discrete Output Voltage:
12...24 V DC
Communication Interface:
CANopen, Integrated || CANmotion, Integrated
Type Of Cooling:
integrated fan
Method Of Access:
slave
Phase:
three phase || single phase
Vibration Resistance:
3M4 3 mm 9-200 Hz)IEC 60721-3-3
Rohs Exemption Information:
Yes
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Signalling Function:
servo status and fault codes five 7-segment display units
Operating Position:
vertical
Shock Resistance:
10 gn, type I IEC 60721-3-3
Product Or Component Type:
motion servo drive
Safety Level:
SIL 2 IEC 61800-5-2 2007 || SIL 2 IEC 61508-1 2010 || PL d/category 3 ISO 13849-1 2008 || SIL 2 ISO 13849-1 2009/AC || SIL 2 IEC 60204-1 2006 || SIL 2 IEC 60204-1 2009/A1 || SIL 2 IEC 60204-1 2010/AC || SIL 2 IEC 62061 2012
Protection Type:
against reverse polarity inputs signal || against short-circuits outputs signal || overcurrent motor || overvoltage motor || undervoltage motor || overheating motor || overload motor || overspeed motor
Number Of Addresses:
1-127 CANopen, CANmotion
Product Certifications:
CSA || cULus || CE
Sustainable Offer Status:
Green Premium product
Ip Degree Of Protection:
IP20
Depth:
170 mm
Width:
55 mm
Switching Frequency:
16 kHz
Device Short Name:
LXM28A
Circularity Profile:
ENVEOLI1409001EN
Nominal Power:
1.5 kW 220 V 16 kHz
Electrical Connection:
spring terminal 1.3...1.5 mm², AWG 16 L1-L2) || spring terminal 1.3...1.5 mm², AWG 16 R, S, T) || spring terminal 1.3...1.5 mm², AWG 16 U, V, W, PE) || spring terminal 1.3...1.5 mm², AWG 16 PA/+, PBe)
Discrete Input Logic:
positive or negative CN1)
China Rohs Regulation:
X
Network Frequency:
47.5...63 Hz
Electrical Isolation:
between power and control
Discrete Output Logic:
positive or negative CN1)
Product Compatibility:
servo motor BCH2 130 mm, 3 1500 W
Ambient Air Temperature For Operation:
0-55 °C
Continuous Output Current:
7 A 16 kHz
Pvc Free:
Yes
Status Led:
1 LED (Red) charge || 1 LED (Green) RUN || 1 LED (Red) error
Maximum Leakage Current:
4.5 mA
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Transmission Rate:
250 kbit/s 100-250 m CANopen, CANmotion || 500 kbit/s 4-100 m CANopen, CANmotion || 1 Mbit/s 4-4 m CANopen, CANmotion
Electromagnetic Compatibility:
conducted emission - test level: level 3 category C3 conforming to IEC 61800-3
Continuous Power:
1500 W 220 V
Output Current 3S Peak 2:
21 A 220 V
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Mercury Free:
Yes
Analogue Input Number:
2
Net Weight:
1.2 kg
[Us] Rated Supply Voltage:
200...240 V - 10...15 %)three phase || 200...240 V - 20...15 %)single phase
Output Current 3S Peak:
21 A 220 V
Ambient Air Temperature For Storage:
-25-65 °C
Output Current 3S Peak 3:
21 A 220 V
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Range Of Product:
Lexium 28
Type Of Cable:
shielded motor cable 0-55 °C) copper
Safety Function:
STO (safe torque off), Integrated
Analogue Input Type:
V_REF voltage analog input - 10...10 V 10 kOhm 14 bits || T_REF voltage analog input
Line Current:
10 A 166.6 % 220 V, single phase || 10 A 144.8 % 220 V, three phase
Reach Free Of Svhc:
Yes
Marking:
cULus || CSA || CE
Relative Humidity:
5-95 % without condensation
Control Signal Type:
servo motor encoder feedback CN2
Absolute Accuracy Error:
0.001
Height:
150 mm
Emc Filter:
without EMC filter
Supply Voltage Limits:
200-255 V three phase || 170-255 V single phase
Connector Type:
RJ45 CN4)CANopen, CANmotion
Discrete Output Number:
5 logic output CN1)12...24 V DC || 1 pulse train output (PTO) CN1)
Environmental Disclosure:
ENVPEP1409001EN
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...6561.68 ft (> 1000...2000 m) 1 % per 100 m
Physical Interface:
RS485 Modbus Serial line slave
Discrete Input Number:
8 programmable CN1) || 1 pulse train input (PTI) CN1) || 2 fast capture CN1) || 1 safety function STO CN9)
Discrete Input Voltage:
24 V DC logic
Format Of The Drive:
compact housing
Output Voltage:
<= power supply voltage
Standards:
IEC 61800-5-1
Overvoltage Category:
III
Catalog:
View
Datasheet:
View
Related Products