Schneider Electric LTMR08EFM Motor controller, TeSys T, Motor Management, Ethernet/IP, Modbus/TCP, 6 inputs, 3 outputs, 0.4 to 8A, 100 to 240VAC
Schneider Electric
$905.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric LTMR08EFM Motor controller, TeSys T, Motor Management, Ethernet/IP, Modbus/TCP, 6 inputs, 3 outputs, 0.4 to 8A, 100 to 240VAC
TeSys T is a motor management system that provides full motor monitoring, control, and protection when used with short circuit protection and a contactor. TeSys T manages most critical processes while reducing downtime and increasing productivity. TeSys T is a flexible system that integrates seamlessly into your automation system through five major communication protocols. TeSys T motor management system consist of several components which include the LTMR controller, the expansion module, HMI and software along with several accessories. This controller is the central component in the motor management system. The module manages the basic functions of the motor management system. It manages the measurement of 3 phase current via integral current transformers from 0.4 to 100 A or up to 810 A by external current transformers. It also measures ground current with internal or external ground sensors, motor temperature and the inputs and outputs for the various motor control modes, detected fault management and other functions. Ethernet/IP and Modbus/TCP protocol is used by this controller. Ethernet TCP/IP communication is used. This module has 6 discrete logic inputs, 3 relay logic outputs and a relay output for detected fault signaling overload relay. The current range of this controller is 0.4 to 8 amperes. 120 to 240 VAC is used to power this controller. Controller has the following certifications: UL, CSA NOM, ATEX, BV, EAC, RINA, LROS, DNV, ABS, GL, KERI, RMRoS, C-Tick and CCC.
- Warranty:
- 18 months
- Sustainable Offer Status:
- Green Premium product
- Device Application:
- equipment monitoring and control
- Current State 1 Guaranteed:
- logic input 79...264 V >= 2 mA 25 ms
- Circularity Profile:
- ENVEOLI100411EN_V2
- Electromagnetic Compatibility:
- electrostatic discharge, 3, 8 kV air, 6 kV contact, conforming to EN/IEC 61000-4-2 || communication: surges (common mode), 2 kV, conforming to EN/IEC 61000-4-5 || relay outputs and supply: surges (serial mode), 2 kV, conforming to EN/IEC 61000-4-5 ||
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Bus Type:
- Ethernet IEEE 802.3 0...159 10...100 Mbit/s, RJ45 2 shielded twisted pairs
- Current Consumption:
- 8...62.8 mA
- Mechanical Robustness:
- vibrations mounted on symmetrical rail1 Gn, 5...300 Hz EN/IEC 60068-2-6 || vibrations plate mounted4 Gn, 5...300 Hz EN/IEC 60068-2-6 || shocks half sine wave acceleration15 Gn for 11 ms EN/IEC 60068-2-27
- Supply Voltage Limits:
- 93.5-264 V AC
- Net Weight:
- 0.53 kg
- Environmental Disclosure:
- ENVPEP060308EN_V2
- Connection Pitch:
- 5.08 mm
- Product Or Component Type:
- motor controller
- Pollution Degree:
- 3
- Standards:
- EN 60947-4-1 || IEC 60947-4-1 || CSA C22.2 No 14 || IACS E10 || UL 508
- Contacts Type And Composition:
- 1 NO + 1 NC fault signal || 3 NO
- Overvoltage Category:
- III
- Product Name:
- TeSys T
- Maximum Operating Frequency:
- 2 Hz
- Protection Type:
- thermal overload protection || overload || thermal protection || locked rotor || phase failure || phase unbalance || load fluctuation || reverse polarity protection || overload (long time) || earth-leakage protection || power factor variation
- Current State 0 Guaranteed:
- logic input 0...40 V <= 15 mA 25 ms
- Device Short Name:
- LTMR
- Mercury Free:
- Yes
- Ip Degree Of Protection:
- IP20
- Input Current:
- 3.1 mA 100 V || 7.5 mA 240 V
- Metering Type:
- earth-fault current || imbalance current || temperature || average current Iavg || phase current I1, I2, I3 RMS
- Height:
- 61 mm
- Logic Input Number:
- 6
- Web Services:
- web server
- Depth:
- 122.5 mm
- Operating Altitude:
- <= 6561.68 ft (2000 m) without derating
- [Uimp] Rated Impulse Withstand Voltage:
- 4 kV supply, inputs and outputs EN/IEC 60947-4-1 || 6 kV current or voltage measurement circuit EN/IEC 60947-4-1 || 0.8 kV communication circuit EN/IEC 60947-4-1
- Eu Rohs Directive:
- Compliant with Exemptions
- Tightening Torque:
- control circuit 0.5-0.6 N.m flat 3 mm
- Ambient Air Temperature For Storage:
- -40-80°C
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- [Us] Rated Supply Voltage:
- 100...240 V AC 50/60 Hz
- Rohs Exemption Information:
- Yes
- Halogen Content Performance:
- Halogen free plastic parts product
- [Ui] Rated Insulation Voltage:
- 690 V EN/IEC 60947-1 || 690 V CSA C22.2 No 14 || 690 V UL 508
- Permissible Power:
- 480 VA AC-15), Ie = 2 A, 500000 cycles output) || 30 W DC-13), Ie = 1.25 A, 500000 cycles output)
- Compatibility Code:
- LTMR
- Communication Port Protocol:
- Modbus TCP/EtherNet/IP
- Maximum Operating Rate:
- 1800 cyc/h
- Product Certifications:
- NOM || LROS (Lloyds register of shipping) || RMRoS || CSA || BV || KERI || GL || ABS || ATEX || RINA || UL || C-tick || EAC || CCC || DNV
- Load Current:
- 5 A 250 V AC logic output || 5 A 30 V DC logic output
