null
Schneider Electric JGL37225D82 Circuit breaker, PowerPacT J, 225A, 3 pole, 500VDC, 20kA, lugs, thermal magnetic, 80%

Schneider Electric JGL37225D82 Circuit breaker, PowerPacT J, 225A, 3 pole, 500VDC, 20kA, lugs, thermal magnetic, 80%

Schneider Electric
SKU:
JGL37225D82
$3,779.00
(No reviews yet) Write a Review
Condition:
New
Current Stock:
Description
PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 20kA at 500VDC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT J, 225A, 3 pole, circuit breaker has a breaking capacity of 20kA at 500VDC. This circuit breaker has a continuous current rating of 80%. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
Additional Information
Quality Labels:
CE
Ip Degree Of Protection:
front cover IP40
Device Application:
distribution
Tightening Torque:
25-25 N.m 95-185 mm² (AWG 3/0...350 kcmil)
Length:
25 mm
Width:
104 mm
Trip Unit Technology:
thermal-magnetic
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Range:
PowerPact
Ambient Air Temperature For Storage:
-50-85°C
Line Rated Current:
225-225 A
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Ambient Air Temperature For Operation:
-25-70°C
Weight:
2.4 kg
Rohs Exemption Information:
Yes
Protection Type:
overload protection || short-circuit protection
Awg Gauge:
AWG 3/0...350 kcmil aluminium/copper terminals
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Wire Stripping Length:
25 mm
Pvc Free:
Yes
Breaking Capacity:
65 kA 240 V AC 50/60 Hz UL 489 || 35 kA 480 V AC 50/60 Hz UL 489 || 18 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 20 kA 500 V DC UL 489
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Terminal Identifier:
AL250JD
Mercury Free:
Yes
Height:
191 mm
Environmental Disclosure:
ENVPEP2206031EN
Circuit Breaker Application:
HACR rated
Net Weight:
2.4 kg
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Communication Interface:
Modbus || Ethernet
Circularity Profile:
ENVEOLI2206031EN
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Suitability For Isolation:
yes IEC 60947-2
Electrical Connection:
lugs, line || lugs, load
Mounting Support:
lug
Poles Description:
3P
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Local Signaling:
switched off (OFF) 1 trip indicator green)
Control Type:
toggle
Breaking Capacity Code:
G
Pollution Degree:
3 IEC 60947-1
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Eu Rohs Directive:
Compliant with Exemptions
Magnetic Tripping Current:
500-850 A
Continuous Current Rating:
0.8
Warranty:
18 months
Product Certifications:
UL || CSA || NOM
Mounting Mode:
unit mount lug)
Product Or Component Type:
circuit breaker
Related Products