null
Schneider Electric ATS22C25Q soft starter for asynchronous motor, Altistart 22, control 230V, 230 to 440V, 75 to 132kW

Schneider Electric ATS22C25Q soft starter for asynchronous motor, Altistart 22, control 230V, 230 to 440V, 75 to 132kW

Schneider Electric
SKU:
ATS22C25Q
$3,256.80
(No reviews yet) Write a Review
Condition:
New
Current Stock:
Description
This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line or delta connection. It has a rating of 250A and 230V to 440V, a rated power up to 132kW (400V to 440V in supply line) and up to 220kW (400V to 440V in motor delta connection). It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
Additional Information
[Us] Rated Supply Voltage:
230...440 V - 15...10 %
Mercury Free:
Yes
Motor Starter Type:
soft starter
Type Of Cooling:
forced convection
Installed Device:
31
Function Available:
internal bypass
Type Of Start:
start with torque control (current limited to 3.5 In)
Communication Data Link:
serial
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Network Frequency:
45...66 Hz
Vibration Resistance:
1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm 2-13 Hz)IEC 60068-2-6
Icl Starter Rating:
250 A connection in the motor supply line for standard applications
Relative Humidity:
0-95 % without condensation or dripping water IEC 60068-2-3
Component Name:
ATS22
Discrete Input Type:
LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
Operating Position:
vertical +/- 10 degree
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Ptc Probe Input:
750 Ohm
Device Connection:
in the motor supply line || to the motor delta terminals
Power Dissipation In W:
129 W for standard applications
Ambient Air Temperature For Operation:
-10-40°C without derating) || 40-60°C with current derating 2.2 % per°C)
Ip Degree Of Protection:
IP00
Product Or Component Type:
soft starter
Height:
425 mm
Standards:
IEC 60947-4-2
Width:
206 mm
Range Of Product:
Altistart 22
China Rohs Regulation:
X
Rohs Exemption Information:
Yes
Factory Setting Current:
233 A
Minimum Switching Current:
100 mA 12 V DC relay outputs)
Utilisation Category:
AC-53A
Supply Frequency:
50...60 Hz - 10...10 %
Supply Voltage Limits:
195-484 V
Discrete Input Number:
3
Maximum Switching Current:
5 A 250 V AC resistive 1 relay outputs || 5 A 30 V DC resistive 1 relay outputs || 2 A 250 V AC inductive 0.4 20 ms relay outputs || 2 A 30 V DC inductive 7 ms relay outputs
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Power Range:
55-100 kW 200-240 V 3 phase || 110-220 kW 380-440 V 3 phase
Protection Type:
phase failure line || thermal protection motor || thermal protection starter
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Control Circuit Consumption:
20 W
Product Specific Application:
pumps and fans
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...< 6561.68 ft (> 1000...< 2000 m) with current derating of 2.2 % per additional 100 m
Connector Type:
1 RJ45
Communication Port Protocol:
Modbus
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Discrete Output Number:
2
Country of Origin:
China
Phase:
3 phase
Discrete Input Voltage:
24 V <= 30 V
Related Products