Schneider Electric AK5JB146 Bus Bar Tri+N 160Alg664Mm
Schneider Electric
$345.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric AK5JB146 Bus Bar Tri+N 160Alg664Mm
Busbars can be screw-mounted onto any type of support. If the busbar is to be used with component mounting plates with a tap-off, it is essential that the bus bar is mounted on the AM1DL201 DIN mounting rail. This 4 conducor bus bar system has 30 tap offs at 18 mm intervals. The busbar system is 26.3 inches (668 mm) long. Bus bar system is rated 160 A at 600 VAC. The bus bar system is 26.30 inches long, 3.19 inches wide and 3.23 inches deep. Each wieghs 0.41 oz. The busbar system is UL Listed, CSA certified and meet IEC requirements.
- Reach Free Of Svhc:
- Yes
- Number Of Conductors:
- 4
- Flame Retardance:
- V0 conforming to UL 94
- Mounting Position:
- vertical using side stop AK5BT01 on mounting plates AK5PA || horizontal
- [Ue] Rated Operational Voltage:
- 400 V off-load plugging-in and unplugging, with supply switched on)IEC 60439-1 || 480 V off-load plugging-in and unplugging, with supply switched on)CSA || 480 V off-load plugging-in and unplugging, with supply switched on)UL || 600 V plugging-in and
- Rohs Exemption Information:
- Yes
- Network Type:
- AC
- Enclosure/Cubicle Width:
- 800 mm
- Bar Length:
- 668 mm
- [Ui] Rated Insulation Voltage:
- 600 V CSA || 600 V UL || 690 V IEC 60439-1
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Width:
- 81 mm
- Protection Type:
- aM fuses In = 160 A, Isc = 100 kA, Ie = 160 A || gF fuses In = 160 A, Isc = 100 kA, Ie = 160 A || NS160H circuit breaker In = 160 A, Isc = 36 kA, Ie = 160 A || NS160H circuit breaker In = 160 A, Isc = 70 kA, Ie = 160 A
- Product Or Component Type:
- busbar
- Device Application:
- distribution
- Product Certifications:
- LROS (Lloyds register of shipping) || DNV || UL || CSA
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Toxic Heavy Metal Free:
- Yes
- Ip Degree Of Protection:
- IPxx B conforming to IEC 60529
- I²T On Activation:
- 10000000 A².s
- Tightening Torque:
- 10 N.m
- Fire Resistance:
- 850 °C IEC 60695
- Warranty:
- 18 months
- Peak Current:
- 25 kA
- Depth:
- 82 mm
- Number Of Tap-Offs:
- 30
- China Rohs Regulation:
- Pro-active China RoHS declaration (out of China RoHS legal scope)
- Range:
- Linergy
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Net Weight:
- 1.3 kg
- Standards:
- IEC 60439
- Connections - Terminals:
- connector 2.5-70 mm² flexible with cable end || connector 2.5-70 mm² rigid
- Sustainable Offer Status:
- Green Premium product
- Mercury Free:
- Yes
- Circularity Profile:
- N/A
- Network Frequency:
- 50/60 Hz
- [Ie] Rated Operational Current:
- 160 A 35 °C
- Environmental Disclosure:
- ENVPEP120206EN
- Eu Rohs Directive:
- Compliant
- Product Name:
- HK
- Bar Width:
- 45 mm
- Datasheet:
- View
