The Baumer VS XF800M03I12IP is a high-performance vision sensor featuring a 1/3? CMOS monochrome sensor with a resolution of 752 × 480 px. It includes integrated LED infrared illumination (860 nm) and operates safely within the free group LED class as per EN 62471:2008. This device offers two operational modes: a high-resolution mode with up to 50 inspections per second and a high-speed mode with limited resolution at up to 100 inspections per second. It can handle object distances ranging from 50 mm to 450 mm and supports up to 255 jobs with 32 features per job. The sensor is equipped with Baumer FEX® 4.0 signal processing, a 12 mm lens, and has a defect image memory of 32. It operates on a 24 V ±25% nominal voltage power supply and consumes a maximum of 18 W with I/O. The sensor includes multiple digital inputs and outputs for comprehensive connectivity and control options. Setup is facilitated via Ethernet, and it supports PROFINET, EtherNet/IP, and TCP/UDP protocols. The device's visualization capabilities are enhanced by a configurable web interface with a MultiViewer function. The robust aluminum housing and PMMA cover glass with an integrated daylight filter ensure durability and reliability in various industrial environments. Dimensions are 53 mm in width, 99.5 mm in height, and 38 mm in depth, with a weight of up to 250 g.
- Resolution:
- 752 × 480 px
- Sensor type:
- 1/3? CMOS, monochrome
- Illumination:
- integrated, LED infrared (860 nm)
- LED class:
- free group (risk free, EN 62471:2008)
- High-resolution mode:
- max. 50 inspections per second
- High-speed mode (limited resolution):
- max. 100 inspections per second
- Object distance min.:
- 50 mm
- Object distance max.:
- 450 mm
- Number of jobs (products):
- ? 255
- Features per job:
- 32
- Signal processing:
- Baumer FEX® 4.0
- Defect image memory:
- 32
- Lens:
- 12 mm
- Nominal voltage power supply:
- 24 V ±25 %
- Nominal voltage power supply (add-on):
- Class 2 according to NEC / protection class III
- Nominal voltage power supply (info):
- The device is intended for supply from an isolated limited power source according to UL61010-1, 3rd ed cl. 9.4 or a limited energy source according to UL60950-1 or Class 2 according to NEC.
- Power consumption:
- Max. 18 W (with I/O)
- Inputs:
- 8 30 V (polarity protected)
- Digital inputs:
- 5 inputs trigger job selection external teach-in encoders (CH-A, CH-B) 500 kHz
- Outputs:
- PNP Ipeak = 100 mA and Ieff = 50 mA (short-circuit proof)
- Digital outputs:
- 5 outputs Pass / Fail Flash Sync Alarm Camera Ready Output Enable
- Initial setup:
- Ethernet (10BASE-T / 100BASE-TX)
- Process interface:
- PROFINET (CC-A) EtherNet/IP TCP/UDP (Ethernet)
- Visualization:
- configurable web interface with MultiViewer function
- Width:
- 53 mm
- Height:
- 99.5 mm
- Depth:
- 38 mm
- Weight:
- ? 250 g
- Material:
- housing: aluminum cover glass: PMMA, integrated daylight filter (780 nm)
- Datasheet:
- View
- Operating Manual:
- View
