The Baumer VS XF700M03W16IP is a high-performance vision sensor featuring a 1/3? CMOS monochrome sensor with a resolution of 752 × 480 px. It includes integrated white LED illumination, classified under LED risk group 1 for low risk. The sensor operates in two modes: high-resolution with up to 50 inspections per second and high-speed mode with limited resolution at 100 inspections per second. It has an object distance range from 100 mm to 300 mm and can handle up to 255 jobs with 32 features per job. The sensor uses Baumer FEX® 4.0 for advanced signal processing and has a defect image memory of 32. Equipped with a 16 mm lens, it requires a nominal voltage power supply of 24 V ±25% and consumes a maximum of 18 W with I/O. The sensor offers multiple digital inputs and outputs for enhanced connectivity and control, and supports Ethernet, PROFINET, EtherNet/IP, and TCP/UDP for network integration. Its compact design measures 53 mm in width, 99.5 mm in height, and 38 mm in depth, weighing less than 250 g with an aluminum housing and PMMA cover glass. Configuration and monitoring are facilitated through a configurable web interface with MultiViewer function.
- Resolution:
- 752 × 480 px
- Sensor type:
- 1/3? CMOS, monochrome
- Illumination:
- integrated, LED white
- LED class:
- risk group 1 (low risk, EN 62471:2008)
- High-resolution mode:
- max. 50 inspections per second
- High-speed mode (limited resolution):
- max. 100 inspections per second
- Object distance min.:
- 100 mm
- Object distance max.:
- 300 mm
- Number of jobs (products):
- ? 255
- Features per job:
- 32
- Signal processing:
- Baumer FEX® 4.0
- Defect image memory:
- 32
- Lens:
- 16 mm
- Nominal voltage power supply:
- 24 V ±25 %
- Nominal voltage power supply (add-on):
- Class 2 according to NEC / protection class III
- Nominal voltage power supply (info):
- The device is intended for supply from an isolated limited power source according to UL61010-1, 3rd ed cl. 9.4 or a limited energy source according to UL60950-1 or Class 2 according to NEC.
- Power consumption:
- Max. 18 W (with I/O)
- Inputs:
- 8 30 V (polarity protected)
- Digital inputs:
- 5 inputs trigger job selection external teach-in encoders (CH-A, CH-B) 500 kHz
- Outputs:
- PNP Ipeak = 100 mA and Ieff = 50 mA (short-circuit proof)
- Digital outputs:
- 5 outputs Pass / Fail Flash Sync Alarm Camera Ready Output Enable
- Initial setup:
- Ethernet (10BASE-T / 100BASE-TX)
- Process interface:
- PROFINET (CC-A) EtherNet/IP TCP/UDP (Ethernet)
- Visualization:
- configurable web interface with MultiViewer function
- Width:
- 53 mm
- Height:
- 99.5 mm
- Depth:
- 38 mm
- Weight:
- ? 250 g
- Material:
- housing: aluminum cover glass: PMMA
- Datasheet:
- View
- Operating Manual:
- View
