The Baumer VS ID510M03W12IP is a high-performance vision sensor featuring a 1/3? CMOS monochrome sensor with a resolution of 752 × 480 px. It includes integrated white LED illumination, classified under LED class risk group 1 for low risk. The sensor can perform up to 50 high-resolution inspections per second, with an object distance ranging from 50 mm to 450 mm. It supports up to 255 jobs with 32 features per job, utilizing Baumer FEX® 4.0 signal processing. The device includes a 12 mm lens, defect image memory for 32 images, and operates on a 24 V ±25% power supply. It consumes a maximum of 18 W power with I/O options including 5 digital inputs and outputs for various controls and signals. Connectivity is facilitated through Ethernet and includes options for PROFINET, EtherNet/IP, and TCP/UDP protocols. The sensor's dimensions are 53 mm in width, 99.5 mm in height, and 38 mm in depth, weighing less than 250 g. The housing is made of aluminum with a PMMA cover glass. Configuration and monitoring are accessible via a configurable web interface with a MultiViewer function.
- Resolution:
- 752 × 480 px
- Sensor type:
- 1/3? CMOS, monochrome
- Illumination:
- integrated, LED white
- LED class:
- risk group 1 (low risk, EN 62471:2008)
- High-resolution mode:
- max. 50 inspections per second
- Object distance min.:
- 50 mm
- Object distance max.:
- 450 mm
- Number of jobs (products):
- ? 255
- Features per job:
- 32
- Signal processing:
- Baumer FEX® 4.0
- Defect image memory:
- 32
- Lens:
- 12 mm
- Nominal voltage power supply:
- 24 V ±25 %
- Nominal voltage power supply (add-on):
- Class 2 according to NEC / protection class III
- Nominal voltage power supply (info):
- The device is intended for supply from an isolated limited power source according to UL61010-1, 3rd ed cl. 9.4 or a limited energy source according to UL60950-1 or Class 2 according to NEC.
- Power consumption:
- Max. 18 W (with I/O)
- Inputs:
- 8 30 V (polarity protected)
- Digital inputs:
- 5 inputs trigger job selection external teach-in encoders (CH-A, CH-B) 500 kHz
- Outputs:
- PNP Ipeak = 100 mA and Ieff = 50 mA (short-circuit proof)
- Digital outputs:
- 5 outputs Pass / Fail Flash Sync Alarm Camera Ready Output Enable
- Initial setup:
- Ethernet (10BASE-T / 100BASE-TX)
- Process interface:
- PROFINET (CC-A) EtherNet/IP TCP/UDP (Ethernet)
- Visualization:
- configurable web interface with MultiViewer function
- Width:
- 53 mm
- Height:
- 99.5 mm
- Depth:
- 38 mm
- Weight:
- ? 250 g
- Material:
- housing: aluminum cover glass: PMMA
- Datasheet:
- View
- Operating Manual:
- View
