The Baumer RR30.DAJ2-IGPI.9CF/P043 is a high-performance sensor with a scanning range of 0.3 to 12 meters, which can be extended up to 18 meters via IO-Link. It features a repeat accuracy of less than 4 mm and a response time that can be adjusted down to 12 ms. The sensor operates with a carrier frequency of 122 GHz and a bandwidth of 1 GHz, ensuring precise measurements with a linearity error of less than ±20 mm for distances under 1 meter and less than ±6 mm for distances over 1 meter. It supports a voltage supply range of 12 to 30 VDC and includes safety features such as short circuit and reverse polarity protection. The cylindrical, nickel-plated brass housing and PEI sensing face are designed for durability, with an IP 68/69K protection class for high resistance to dust and water. The sensor is equipped with a current output/push-pull output circuit and offers an output signal of 4 to 20 mA or 20 to 4 mA. It operates effectively in temperatures ranging from -40 to +65 °C and is certified by FCC, RSS, and EN standards.
- Scanning range Sd:
- 0.3 12 m
- Scanning range close limit Sdc:
- 0.3 12 m
- Scanning range far limit Sde:
- 0.3 12 m, (0.2 .18 m IO-Link)
- Repeat accuracy:
- < 4 mm
- Response time ton:
- < 40 ms, adjustable via IO-Link to 12 ms
- Release time toff:
- < 40 ms, adjustable via IO-Link to 12 ms
- Temperature drift:
- <± 10 mm (Full Scale)
- Power-up drift:
- < 2 mm compensated after 20 min.
- Adjustment:
- IO-Link
- Carrier frequency:
- 122 GHz
- Band width:
- 1 GHz
- Hysteresis typ.:
- 5 % (adjustable via IO-Link)
- Linearity error:
- < ± 20 mm (<1m) < ± 6 mm (>1m)
- Modulation type:
- FMCW
- Transmitting power (EIRP):
- < +20 dBm
- Aperture angle:
- 6 °
- MTTF:
- > 126 years
- Approvals/certificates:
- FCC / CFR-47 part 18 (USA) RSS-210 Issue 10 (Canada) EN 305 550-1 V.1.2.1 (European Union) EN 305 550-2 V.1.2.1 (European Union)
- Voltage supply range +Vs:
- 12 30 VDC
- Current consumption max. (no load):
- 220 mA
- Short circuit protection:
- Yes
- Reverse polarity protection:
- Yes, Vs to GND
- Output circuit:
- Current output / push-pull
- Output signal:
- 4 ... 20 mA / 20 ... 4 mA
- Output current:
- <100 mA
- Voltage drop Vd:
- <2.5 VDC
- Design:
- Cylindrical threaded
- Housing material:
- Brass nickel plated
- Material (sensing face):
- Plastics (PEI)
- Width / diameter:
- 30 mm
- Height / length:
- 107 mm
- Connection types:
- Connector M12
- Operating temperature:
- -40 +65 °C
- Storage temperature:
- -40 +85 °C
- Protection class:
- IP 68/69K
- Datasheet:
- View
- Operating Manual:
- View
