The Baumer FLDK 110G1006/S14 11040147 is a high-performance sensor designed for precise edge detection and counting applications. It features a measuring distance of 0 to 120 mm with an optimal operating distance of 100 mm. The sensor can handle counting rates up to 600,000 copies per hour and object speeds up to 5 m/sec. It is equipped with a pulsed red laser diode light source, emitting a visible red laser line of 3 mm at a wavelength of 670 nm, and falls under Laser class 2. The device includes a yellow LED edge indicator and a green LED for power status. It offers adjustable false pulse suppression and has a voltage supply range of 10 to 30 VDC. The sensor's output circuit is push-pull with selectable output pulse lengths of 5 or 10 ms. It also features short circuit and reverse polarity protection. The rectangular housing is made of PA 6 with a glass front optics and an M12 x 1, 5-pin connector base. It operates within a temperature range of 0 to +50 °C and meets IP 54 protection class standards.
- Measuring distance Sd:
- 0 120 mm
- Optimum operating distance:
- 100 mm
- Counting rate:
- < 600000 Copies/h
- Object speed:
- < 5 m/sec
- Sensitivity:
- Single sheet/edge thickness 0,25 mm
- Sync. input:
- No
- Measuring point:
- Visible red laser line 3 mm
- Light source:
- Pulsed red laser diode
- Wave length:
- 670 nm
- Laser class:
- 2
- Edge indicator:
- LED yellow
- Power on indication:
- LED green
- False pulse suppression:
- On/off switchable
- Voltage supply range +Vs:
- 10 30 VDC
- Current consumption max. (no load):
- 180 mA
- Output circuit:
- Push-pull
- Output pulse length:
- 5 / 10 ms selectable
- Short circuit protection:
- Yes
- Reverse polarity protection:
- Yes
- Width / diameter:
- 30 mm
- Design:
- Rectangular
- Housing material:
- PA 6
- Connector base (main connector):
- M12 x 1, 5 pin
- Front (optics):
- Glass
- Operating temperature:
- 0 +50 °C
- Protection class:
- IP 54
- Datasheet:
- View
- Operating Manual:
- View
