The Baumer FHDK 04G6102/KS35A 10162787 is a background suppression sensor with a sensing distance of 50 mm -3 mm / +5 mm. It features a flashing light indicator for alignment or soiled lens detection, and a yellow LED light indicator. The sensor has a beam diameter of 2 mm and utilizes a pulsed point source LED with a wavelength of 660 nm. It boasts a fast response and release time of less than 0.5 ms. Operating on a voltage supply range of 11 to 30 VDC, it has a maximum no-load current consumption of 30 mA and a typical consumption of 20 mA. The output function is light operate with a push-pull output circuit and an output current of 50 mA. It includes safety features such as short circuit protection and reverse polarity protection. The sensor's dimensions are 4 mm in width, 44.8 mm in height, and 6.2 mm in depth, with a rectangular plastic (ASA) housing and PMMA front optics. It connects via a flylead connector M8 4 pin, L=200 mm, and is rated IP 65 for protection against dust and water, suitable for operating temperatures from -10 to +50 °C.
- Type:
- Background suppression
- Sensing distance Tw:
- 50 mm -3 mm / +5 mm
- Alignment / soiled lens indicator:
- Flashing light indicator
- Light indicator:
- LED yellow
- Beam diameter:
- 2 mm
- Suppression of reciprocal influence:
- YesLight source=Pulsed point source LED
- Wave length:
- 660 nm
- Response time / release time:
- < 0.5 ms
- Voltage supply range +Vs:
- 11 30 VDC
- Current consumption max. (no load):
- 30 mA
- Current consumption typ.:
- 20 mA
- Voltage drop Vd:
- <2 VDC
- Output function:
- Light operate
- Output circuit:
- Push-pull
- Output current:
- 50 mA
- Short circuit protection:
- Yes
- Reverse polarity protection:
- Yes, supply only
- Width / diameter:
- 4 mm
- Height / length:
- 44.8 mm
- Depth:
- 6.2 mm
- Design:
- Rectangular
- Housing material:
- Plastic (ASA)
- Front (optics):
- PMMA
- Connection types:
- Flylead connector M8 4 pin, L=200 mm
- Protection class:
- IP 65
- Operating temperature:
- -10 +50 °C
- Datasheet:
- View
